CRYO MEDEX – COLD CHAIN SOLUTIONS

CryoMedEx has been crafting high-quality medical coolers for over a decade. Our Medical Cooler packages have been field-tested by patients, doctors, EMT’s, Firemen, Life-Flight operators, prescription companies and more. Check out our medical cooler packages below, and find the right cooler for your specific needs. If you have any questions regarding which medical cooler package is right for you, then give our experts a call at 888-438-7924.

CryoMedEx Coolers are perfect for the following types of medication:

  • Insulin / Diabetes Medication

  • Humira

  • EpiPens

  • Avonex

  • Byetta

  • Copaxone

  • Enbrel

  • Forteo

  • Humulin

  • Xolair

  • Auto Injectors

  • Vaccines

  • Any temperature-sensitive medication

“I’m not sure if you need customer recommendations, but I thought I would send this e-mail anyway. Your product is amazing, and in my case it is a genuine life saver. At age 20 I was diagnosed with early-onset rheumatoid arthritis. Luckily I have great medication which allows me to be mobile and live a normal life. The difficulty is is that my medications needs to be kept cold at all times. As a 20 year old I harbored ambitions to travel the world, but I thought that with my medication it would be impossible. I had searched the internet for a compact cool bag, but I couldn’t find anything small enough that could keep things cold for any longer than a couple of hours. Luckily I stumbled on to your website (I live in the UK), and thanks to your product I can last 24 hours between fridges or ice. This has allowed me to fulfill my ambition of traveling. So far (by age 23) I have taken the Polar Bear Ice-N-Go Medical Cooler on the back of trucks in Cuba, driving in beat up rental cars through Mexico, skiing in Montana, boat rides in the highlands of Guatemala, cycling through the Netherlands, Belgium, France and Italy. My Polar Bear has traveled to Inca ruins in Peru, to jungles in Columbia, up the tallest active volcano in the world (Ecuador), across Bolivian salt flats, hiking in Patagonia and even in to the Atacama desert (one of the hottest and driest places on earth). Thanks!”

ICE N GO MED COOLER

The Ice-N-Go Medical Cooler  consists of the following components:

  • (1) 6-Pack Size Nylon Cooler

(Exterior: 10″Lx7″Wx7″T, Interior: 8″Lx5″Wx5″T)

  • (1) Vacuum Insulated Med Container
    .
    (Exterior: 8″T x 2.5″ Diameter Interior: 7″T x 2 1/8″ Diameter)
    .

  • (1) PBC Reusable Ice Pack

The Ice-N-Go will keep your medication safe and cool indefinitely while traveling. The Ice-N-Go works with or without the provided ice pack. For short term travel you may choose to use the ice pack, but for extended travel you have the option of just adding ice to the Ice-N-Go Cooler every 10-12 hours. This way you do not have to refreeze the ice pack while traveling, unless you choose to. 

The containment area of the Vacuum Insulated Med Container which comes with the Ice-N-Go is 7″ Tall x 2 1/8″ diameter. Your medication will need to fit inside of these dimensions in order for this product to work properly. The Ice-N-Go will maintain an average temperature of 40 degrees Fahrenheit for 10-12 hours at a time.

The Ice-N-Go consists of one Polar Bear Cooler, one Vacuum Insulated Med Container, and one PBC Reusable Ice Pack. A thermometer is NOT included. However we recommend you use our Wireless Thermometer, if you do not already have one of your own. The Wireless Thermometer can be added to your order below as well as additional Ice Packs, Pre Liners and Med Containers.

INSTRUCTIONS FOR USE:

  1. Chill your medication in the refrigerator for at least 24-Hours.

  2. Chill the Vacuum Insulated Med Container in the refrigerator for 24-Hours with the LID OPEN.

  3. Activate and freeze the Ice Pack for at least 24-Hours.

  4. Remove the chilled Vacuum Insulated Container from the refrigerator, and insert your medication into it.

  5. Screw the lid onto the Vacuum Insulated Container securely.

  6. Wrap the Vacuum Insulated Container (with your medication inside) in the ice pack, and insert into the cooler.

  7. Hit the road. Replenish your ice or add fresh ice packs every 10-12 hours.

LARGE MED COOLER

The Large Medical Cooler package consists of the following components:

  • (1) 24-Pack Nylon Cooler

(Exterior: 18″Lx10″Wx12″T, Interior: 16″Lx8″Wx10″T)

  • (2) Medium Watertight Containers

  • (3) PBC Reusable Ice Packs

The Large Med Cooler is designed to work with ice packs or regular ice. The initial cold charge from the ice packs provided, will maintain an average temperature of 40 degrees Fahrenheit for around 12 hours. After that you will need to add ice for continued travel or re-freeze your Polar Bear ice packs.

The containment area of the containers that come with the Large Med Cooler is 5.25 inches x 8 inches x 3.25 inches. Your medication will need to fit inside of these Containers in order for this product to work properly.

The Large Med Cooler consists of one 24 Pack Polar Bear Cooler, two Med Storage Containers, pre-liner and three PBC re-usable Ice Packs. The thermometer is NOT included. However we recommend you use our Wireless Thermometer, if you do not already have one of your own. The Wireless Thermometer can be added to your order, as well as additional Ice Packs, Pre Liners and Med Containers.

Please note that coolers do not come with the medical symbol embroidered.

INSTRUCTIONS FOR USE:

  1. Refrigerate your medication for at least 24 hours.

  2. Remove the chilled medication from the refrigerator, and insert it into the watertight containers. Close the lid on each  container tightly, and clip it down on all four sides to ensure that no water gets inside. You should hear an audible “Click” sound when each latch is closed.

  3. Lay one ice pack on the bottom of the interior compartment of the cooler.

  4. Place watertight containers (with medication inside) on top of the first ice pack.

  5. Use the remaining ice packs to cover the top & sides of the container, creating an “Ice Box” around your medication.

  6. Close the zipper.

  7. Pull down the female side-release buckle (found on either side of the zipper) so that it faces the ground, and secure the male side release buckle (found on the bottom ends of the cooler) into the female buckle. Tighten the adjustable nylon straps on the side-release buckles.

  8. Hit the road. Be sure to use replace your ice packs with freshly frozen ice packs every 10-12 hours, or add in regular ice.

X-LARGE MED COOLER

The X-Large Medical Cooler consists of the following components:

 

  • (1) 48-Pack Nylon Cooler

(Exterior: 21″Lx13″Wx13″T, Interior: 18″Lx11″Wx11″T)

  • (2) XL Storage Containers

  • (6) PBC Reusable Ice Packs

The XL Med Cooler is designed to work with ice packs or regular ice. The initial cold charge from the ice packs provided, will maintain an average temperature of 40 degrees Fahrenheit for around 12 hours. After that you will need to add ice for continued travel or re-freeze your Polar Bear ice packs.

The containment area of the two included XL Watertight Containers is 11.5 inches x 9.5 inches x 4.5 inches each. Your medication will need to fit inside these containers in order for this product to work properly.

The XL Med Cooler consists of one 48 Pack Polar Bear Cooler, two XL Watertight Storage Containers and six PBC re-usable Ice Packs. The thermometer is NOT included. However we recommend you use our Wireless Thermometer, if you do not already have one of your own. The Wireless Thermometer can be added to your order below as well as additional Ice Packs, Pre Liners and Watertight Containers.

INSTRUCTIONS FOR USE:

  1. Refrigerate your medication for at least 24 hours.

  2. Remove the chilled medication from the refrigerator, and insert it into the watertight container. Close the lid on the containers tightly, and clip it down on all four sides to ensure that no water gets inside. You should hear an audible “Click” sound when each latch is closed.

  3. Lay two ice packs on the bottom of the interior compartment of the cooler, covering the entire bottom portion of the interior compartment.

  4. Place watertight containers (with medication inside) on top of the first layer of  ice packs.

  5. Use the remaining ice packs to cover the top & sides of the container, creating an “Ice Box” around your medication.

  6. Close the zipper.

  7. Pull down the female side-release buckle (found on either side of the zipper) so that it faces the ground, and secure the male side release buckle (found on the bottom ends of the cooler) into the female buckle. Tighten the adjustable nylon straps on the side-release buckles.

  8. Hit the road. Be sure to use replace your ice packs with freshly frozen ice packs every 10-12 hours, or add in regular ice.

BACK PACK MED COOLER

The Backpack Medical Cooler consists of the following components:

  • (1) Backpack Nylon Cooler

(Exterior: 12″Lx7″Wx18″T, Interior: 10″Lx5″Wx16″T)

  • (2) Medium Storage Containers

  • (3) PBC Reusable Ice Packs

The Backpack Med Cooler is designed to work with ice packs or regular ice. The initial cold charge from the ice packs provided, will maintain an average temperature of 40 degrees Fahrenheit for around 12 hours. After that you will need to add ice for continued travel or re-freeze your Polar Bear ice packs.

The containment area of the two included Medium Watertight Containers is5.25 inches x 8 inches x 3.25 inches each. Your medication will need to fit inside these containers in order for this product to work properly.

The Backpack Med Cooler consists of one Backpack Polar Bear Cooler, two Medium Watertight Storage Containers and three PBC re-usable Ice Packs. A thermometer is NOT included. However we recommend you use our Wireless Thermometer, if you do not already have one of your own. The Wireless Thermometer can be added to your order below as well as additional Ice Packs, Pre Liners and Watertight Containers.

INSTRUCTIONS FOR USE:

  1. Refrigerate your medication for at least 24 hours.

  2. Remove the chilled medication from the refrigerator, and insert it into the watertight container(s). Close the lid on the containers tightly, and clip it down on all four sides to ensure that no water gets inside. You should hear an audible “Click” sound when each latch is closed.

  3. Lay one ice packs on the bottom of the interior compartment of the cooler, covering the entire bottom portion of the interior compartment.

  4. Place the first watertight container (with medication inside) on top of the first ice pack.

  5. Cover the first container with the second ice pack.

  6. Stack the second container on top of the second ice pack.

  7. Cover the top of the second container with the third ice pack.

  8. Close the zipper.

  9. Pull down the female side-release buckle (found on either side of the zipper) so that it faces the ground, and secure the male side release buckle (found on the sides of the cooler) into the female buckle. Tighten the adjustable nylon straps on the side-release buckles.

  10. Hit the road. Be sure to use replace your ice packs with freshly frozen ice packs every 10-12 hours, or add in regular ice.